SOM-07-02 Chapter 07 · Deflection of Beams

Macaulay's Method for Discontinuous Loading & Concentrated Couples

In this chapter (4 topics)
On this page

1. Topic Metadata & Scope

Attribute Specification
Topic ID SOM-07-02
Chapter Chapter 07: Deflection of Beams (07_deflection_of_beams)
Subject Strength of Materials (Solid Mechanics)
Target Examinations GATE CE, UPSC ESE, SSC JE, State AE, RRB JE
Prerequisites SOM-07-01 (Differential Equation of Elastic Curve & Double Integration), SOM-03-03 (SFD & BMD)
Authoritative Reference Codes IS 456:2000 Cl. 23.2, IS 800:2007 Table 6, Eurocode 3 Part 1-1
Key Terminology Macaulay's method, Clebsch's method, singularity functions, Macaulay bracket notation (⟨x−a⟩n\langle x - a \rangle^n), discontinuous loading, point loads, concentrated couples / moments, partial UDLs, continuation technique, fictitious compensation loads

2. Physical Mechanics & Theoretical Foundation

2.1 The Piecewise Discontinuity Bottleneck in Direct Double Integration

When a beam carries multiple point loads, concentrated moments, or partial uniformly distributed loads, the bending moment distribution M(x)M(x) is not a single continuous mathematical function across the entire span:

  • For a beam with nn distinct loading intervals, direct double integration requires setting up nn separate differential equations: EId2yidx2=Mi(x)(i=1,2,…,n)EI \frac{d^2 y_i}{dx^2} = M_i(x) \quad (i = 1, 2, \dots, n)
  • Integrating each interval twice introduces 2n2n unknown constants of integration (C1,C2,C3,…,C2nC_{1}, C_{2}, C_{3}, \dots, C_{2n}).
  • Evaluating these constants demands:
    • 2 physical boundary conditions at the supports (e.g., y(0)=0y(0) = 0 and y(L)=0y(L) = 0).
    • 2(n−1)2(n - 1) internal continuity and compatibility conditions at the boundaries between adjacent segments: yi(xi,i+1)=yi+1(xi,i+1)(Deflection Continuity)y_i(x_{i, i+1}) = y_{i+1}(x_{i, i+1}) \quad (\text{Deflection Continuity}) dyidx∣xi,i+1=dyi+1dx∣xi,i+1(Slope Continuity)\left.\frac{dy_i}{dx}\right|_{x_{i, i+1}} = \left.\frac{dy_{i+1}}{dx}\right|_{x_{i, i+1}} \quad (\text{Slope Continuity})
  • For a simply supported beam with just two point loads (n=3n = 3 segments), an engineer must solve a tedious system of 6 simultaneous equations with 6 unknowns!

2.2 Macaulay's Unified Single-Equation Breakthrough

In 1919, British mathematician W. H. Macaulay (building upon earlier insights by Alfred Clebsch) introduced a modified notation using singularity functions (Macaulay brackets):

  1. A single continuous differential equation is formulated for the entire beam by considering an arbitrary cross-section X−XX-X located in the very last (rightmost) bay of the beam.
  2. Every discontinuous load term is enclosed in special brackets ⟨x−a⟩\langle x - a \rangle.
  3. By applying a specialized integration rule, the internal continuity conditions at all segment junctions are automatically satisfied by mathematical construction!
  4. Consequently, only two constants of integration (C1C_1 and C2C_2) exist for the entire beam, regardless of whether there are 2, 5, or 10 point loads!

3. Mathematical Formulation of Macaulay's Bracket Notation

3.1 Definition of the Macaulay Singularity Bracket

The Macaulay bracket ⟨x−a⟩n\langle x - a \rangle^n (where aa is the coordinate where the load originates) is defined mathematically as:

⟨x−a⟩n={(x−a)nfor x≥a0for x<a\langle x - a \rangle^n = \begin{cases} (x - a)^n & \text{for } x \ge a \\ 0 & \text{for } x < a \end{cases}
  • When evaluating slope or deflection at a point xx to the left of the load (x<ax < a), the quantity inside the bracket is negative; the entire bracket term is set to zero (discarded).
  • When x≥ax \ge a, the bracket behaves exactly as an ordinary algebraic term (x−a)n(x - a)^n.

3.2 The Sacred Macaulay Integration Rule

Unlike standard calculus where ∫(x−a) dx=x22−ax\int (x - a) \, dx = \frac{x^2}{2} - ax, Macaulay brackets must always be integrated as a whole entity:

∫⟨x−a⟩n dx=⟨x−a⟩n+1n+1+C\int \langle x - a \rangle^n \, dx = \frac{\langle x - a \rangle^{n+1}}{n + 1} + C ∫⟨x−a⟩n+1n+1 dx=⟨x−a⟩n+2(n+1)(n+2)+C′\int \frac{\langle x - a \rangle^{n+1}}{n + 1} \, dx = \frac{\langle x - a \rangle^{n+2}}{(n + 1)(n + 2)} + C'

[!IMPORTANT] Never expand the bracket term before integrating! Expanding ⟨x−a⟩2\langle x - a \rangle^2 as x2−2ax+a2x^2 - 2ax + a^2 destroys the singularity property and invalidates the unification of constants C1C_1 and C2C_2.


4. Application to Standard Loading Elements

To write the master bending moment equation, section X−XX-X is placed in the last segment at distance xx from the left origin AA:

EId2ydx2=M(x)EI \frac{d^2 y}{dx^2} = M(x)

Vertical divider lines (or dashes) are conventionally drawn to separate terms that become active in successive bays:

4.1 Concentrated Point Load WW at x=ax = a

  • Moment contribution at section x>ax > a (hogging): −W⟨x−a⟩1- W \langle x - a \rangle^1
  • First Integration (Slope contribution): −W⟨x−a⟩22- \frac{W \langle x - a \rangle^2}{2}
  • Second Integration (Deflection contribution): −W⟨x−a⟩36- \frac{W \langle x - a \rangle^3}{6}

4.2 Uniformly Distributed Load ww Starting at x=ax = a and Continuing to Free End

  • Moment contribution at section x>ax > a: −w⟨x−a⟩22- \frac{w \langle x - a \rangle^2}{2}
  • First Integration: −w⟨x−a⟩36- \frac{w \langle x - a \rangle^3}{6}
  • Second Integration: −w⟨x−a⟩424- \frac{w \langle x - a \rangle^4}{24}

4.3 Concentrated Pure Moment / Couple M0M_0 at x=ax = a

When a concentrated couple M0M_0 acts at x=ax = a (say, clockwise), it must be entered into the moment equation with an exponent of zero:

+M0⟨x−a⟩0\mathbf{+ M_0 \langle x - a \rangle^0}
  • Why exponent 0 is mandatory:
    1. Dimensional Homogeneity: M0M_0 is already a moment (N⋅mm\text{N}\cdot\text{mm}). Multiplying by a distance (x−a)(x - a) would yield N⋅mm2\text{N}\cdot\text{mm}^2, which is dimensionally incorrect.
    2. Physical Kinematics:
      • First integration yields: ∫M0⟨x−a⟩0 dx=M0⟨x−a⟩1\int M_0 \langle x - a \rangle^0 \, dx = M_0 \langle x - a \rangle^1 which creates a sudden finite jump (kink) in the slope θ\theta of magnitude Δθ=M0/EI\Delta\theta = M_0 / EI across x=ax = a.
      • Second integration yields: ∫M0⟨x−a⟩1 dx=M0⟨x−a⟩22\int M_0 \langle x - a \rangle^1 \, dx = \frac{M_0 \langle x - a \rangle^2}{2} which evaluates to zero at x=ax = a, guaranteeing that the vertical deflection yy remains perfectly continuous!

5. The Partial UDL Continuation Technique

5.1 The Mathematical Dilemma of Segmented UDLs

Macaulay brackets possess an automatic "turn-on" mechanism at x=ax = a, but they have no built-in "turn-off" mechanism:

  • If a UDL of intensity ww starts at x=ax = a and terminates at x=bx = b (b<Lb < L), writing −w⟨x−a⟩22-\frac{w \langle x - a \rangle^2}{2} applies the load across the entire remainder of the beam from aa all the way to LL!

5.2 The Continuation & Compensation Principle

To maintain a single unified equation:

  1. Extend the downward UDL of intensity ww from its cutoff point x=bx = b continuously to the far right end LL.
  2. Compensate simultaneously by applying an equal, opposite upward UDL of intensity −w-w starting at x=bx = b and extending to the far right end LL.
  3. The net physical load between bb and LL is (+w)+(−w)=0(+w) + (-w) = 0, exactly restoring the original unloaded state!

The resulting bending moment expression is:

M(x)=RAx  ∣  −w⟨x−a⟩22  ∣  +w⟨x−b⟩22\mathbf{M(x) = R_A x \; \Big| \; - \frac{w \langle x - a \rangle^2}{2} \; \Big| \; + \frac{w \langle x - b \rangle^2}{2}}
  • For x<ax < a: Neither bracket is active; M(x)=RAxM(x) = R_A x.
  • For a≤x<ba \le x < b: Only the first bracket is active; M(x)=RAx−w(x−a)22M(x) = R_A x - \frac{w(x - a)^2}{2}.
  • For x≥bx \ge b: Both brackets are active; the second bracket cancels the extended portion of the first bracket!

6. Determination of Integration Constants C1C_1 and C2C_2

For a simply supported beam of span LL supported at x=0x = 0 (AA) and x=Lx = L (BB):

  1. At Support AA (x=0x = 0):

    • The deflection is zero: y(0)=0y(0) = 0.
    • Since x=0x = 0 lies in the first segment (before any internal loads), all Macaulay brackets ⟨0−a⟩\langle 0 - a \rangle are negative and drop out: EI(0)=RA(0)36+C1(0)+C2  ⟹  C2=0EI (0) = R_A \frac{(0)^3}{6} + C_1(0) + C_2 \implies \mathbf{C_2 = 0}

    [!TIP] For any beam whose origin x=0x = 0 is a simple pin/roller support or fixed support, C2C_2 is always identically zero.

  2. At Support BB (x=Lx = L):

    • The deflection is zero: y(L)=0y(L) = 0.
    • Because x=Lx = L lies at the extreme right end, every single Macaulay bracket term is active (L>aL > a, L>bL > b): 0=RAL36−∑Wi(L−ai)36−∑wj(L−aj)424+C1L0 = R_A \frac{L^3}{6} - \sum \frac{W_i (L - a_i)^3}{6} - \sum \frac{w_j (L - a_j)^4}{24} + C_1 L Solving this linear algebraic equation directly gives the unique value of C1C_1.

7. SVG Technical Diagrams & Visual Explanations

7.1 Singularity Bracket Functions & Section X-X in Final Bay

The diagram below illustrates the mathematical functions ⟨x−a⟩n\langle x - a \rangle^n for step, ramp, and quadratic profiles, along with the sectioning protocol across multi-bay beams:

Macaulay Bracket Notation

7.2 UDL Continuation Trick & Concentrated Couple Modeling

The diagram below depicts the extension and compensatory loading for partial UDLs and the slope-step behavior of concentrated moments:

Macaulay Continuation Trick

8. Step-by-Step Solved Numerical Examples

Problem 1: Simply Supported Beam with Eccentric Point Load (GATE CE Pattern)

Statement:
A simply supported beam of span L=6.0 mL = 6.0\text{ m} carries a single concentrated load W=60 kNW = 60\text{ kN} at a distance a=2.0 ma = 2.0\text{ m} from the left support AA (so b=4.0 mb = 4.0\text{ m} to right support BB). Given flexural rigidity EI=2.0×1013 N⋅mm2EI = 2.0 \times 10^{13}\text{ N}\cdot\text{mm}^2:

  1. Formulate the unified Macaulay differential equation for the entire beam.
  2. Calculate the integration constants C1C_1 and C2C_2.
  3. Determine the slope at both supports (θA\theta_A and θB\theta_B).
  4. Compute the vertical deflection directly under the load (yloady_{\text{load}}).
  5. Determine the location (xmax⁡x_{\max}) and magnitude (δmax⁡\delta_{\max}) of the absolute maximum deflection.

Solution:

Step 1: Support Reactions

ΣMB=0  ⟹  RA×6.0−60×4.0=0  ⟹  RA=2406=40 kN=40000 N\Sigma M_B = 0 \implies R_A \times 6.0 - 60 \times 4.0 = 0 \implies R_A = \frac{240}{6} = \mathbf{40\text{ kN} = 40000\text{ N}} ΣFy=0  ⟹  RB=60−40=20 kN=20000 N\Sigma F_y = 0 \implies R_B = 60 - 40 = \mathbf{20\text{ kN} = 20000\text{ N}}

Step 2: Formulate Macaulay Equations

Taking section X−XX-X in the second bay (x>2000 mmx > 2000\text{ mm}):

EId2ydx2=RAx  ∣  −W⟨x−2000⟩1EI \frac{d^2 y}{dx^2} = R_A x \; \Big| \; - W \langle x - 2000 \rangle^1 EId2ydx2=40000x  ∣  −60000⟨x−2000⟩1EI \frac{d^2 y}{dx^2} = 40000 x \; \Big| \; - 60000 \langle x - 2000 \rangle^1

Integrating once for slope:

EIdydx=40000x22+C1  ∣  −60000⟨x−2000⟩22EI \frac{dy}{dx} = 40000 \frac{x^2}{2} + C_1 \; \Big| \; - 60000 \frac{\langle x - 2000 \rangle^2}{2} EIdydx=20000x2+C1  ∣  −30000⟨x−2000⟩2— (Eq. 1)EI \frac{dy}{dx} = 20000 x^2 + C_1 \; \Big| \; - 30000 \langle x - 2000 \rangle^2 \quad \text{--- (Eq. 1)}

Integrating again for deflection:

EIy=20000x33+C1x+C2  ∣  −30000⟨x−2000⟩33EI y = 20000 \frac{x^3}{3} + C_1 x + C_2 \; \Big| \; - 30000 \frac{\langle x - 2000 \rangle^3}{3} EIy=200003x3+C1x+C2  ∣  −10000⟨x−2000⟩3— (Eq. 2)EI y = \frac{20000}{3} x^3 + C_1 x + C_2 \; \Big| \; - 10000 \langle x - 2000 \rangle^3 \quad \text{--- (Eq. 2)}

Step 3: Evaluate Constants C1C_1 and C2C_2

  • At x=0x = 0, y=0y = 0: The bracket term drops out: 0=0+0+C2  ⟹  C2=00 = 0 + 0 + C_2 \implies \mathbf{C_2 = 0}
  • At x=L=6000 mmx = L = 6000\text{ mm}, y=0y = 0: The bracket is active: 0=200003(6000)3+C1(6000)−10000(6000−2000)30 = \frac{20000}{3} (6000)^3 + C_1 (6000) - 10000 (6000 - 2000)^3 (6000)3=2.16×1011  ⟹  200003×2.16×1011=1.44×1015 N⋅mm3(6000)^3 = 2.16 \times 10^{11} \implies \frac{20000}{3} \times 2.16 \times 10^{11} = 1.44 \times 10^{15}\text{ N}\cdot\text{mm}^3 (4000)3=6.4×1010  ⟹  10000×6.4×1010=6.4×1014 N⋅mm3(4000)^3 = 6.4 \times 10^{10} \implies 10000 \times 6.4 \times 10^{10} = 6.4 \times 10^{14}\text{ N}\cdot\text{mm}^3 0=1.44×1015−6.4×1014+6000C10 = 1.44 \times 10^{15} - 6.4 \times 10^{14} + 6000 C_1 6000C1=−8.0×1014  ⟹  C1=−1.33333×1011 N⋅mm26000 C_1 = - 8.0 \times 10^{14} \implies \mathbf{C_1 = -1.33333 \times 10^{11}\text{ N}\cdot\text{mm}^2}

Step 4: Slopes at Supports

  • At support AA (x=0x = 0): Bracket drops out: θA=dydx∣0=C1EI=−1.33333×10112.0×1013=−0.006667 rad=−0.382∘\theta_A = \left.\frac{dy}{dx}\right|_{0} = \frac{C_1}{EI} = \frac{-1.33333 \times 10^{11}}{2.0 \times 10^{13}} = \mathbf{-0.006667\text{ rad} = -0.382^\circ}
  • At support BB (x=6000 mmx = 6000\text{ mm}): EIθB=20000(6000)2−1.33333×1011−30000(4000)2EI \theta_B = 20000 (6000)^2 - 1.33333 \times 10^{11} - 30000 (4000)^2 EIθB=7.20×1011−1.33333×1011−4.80×1011=+1.06667×1011EI \theta_B = 7.20 \times 10^{11} - 1.33333 \times 10^{11} - 4.80 \times 10^{11} = +1.06667 \times 10^{11} θB=1.06667×10112.0×1013=+0.005333 rad=+0.306∘\theta_B = \frac{1.06667 \times 10^{11}}{2.0 \times 10^{13}} = \mathbf{+0.005333\text{ rad} = +0.306^\circ}

Step 5: Deflection Under Load (x=2000 mmx = 2000\text{ mm})

At x=2000 mmx = 2000\text{ mm}, the bracket term (2000−2000)3=0(2000 - 2000)^3 = 0:

EIy(2000)=200003(2000)3+(−1.33333×1011)×(2000)EI y(2000) = \frac{20000}{3} (2000)^3 + (-1.33333 \times 10^{11}) \times (2000) EIy(2000)=5.3333×1013−2.6667×1014=−2.13333×1014 N⋅mm3EI y(2000) = 5.3333 \times 10^{13} - 2.6667 \times 10^{14} = -2.13333 \times 10^{14}\text{ N}\cdot\text{mm}^3 yload=−2.13333×10142.0×1013=−10.667 mm(Downward)y_{\text{load}} = \frac{-2.13333 \times 10^{14}}{2.0 \times 10^{13}} = \mathbf{-10.667\text{ mm} \quad (\text{Downward})}

Step 6: Location and Value of Maximum Deflection

  1. Trial in Left Segment (0≤x≤2000 mm0 \le x \le 2000\text{ mm}, where the Macaulay bracket is inactive): EIdydx=20000x2+C1=0  ⟹  20000x2=1.33333×1011  ⟹  x2=6.66667×106 mm2EI \frac{dy}{dx} = 20000 x^2 + C_1 = 0 \implies 20000 x^2 = 1.33333 \times 10^{11} \implies x^2 = 6.66667 \times 10^6\text{ mm}^2 xtrial=6.66667×106=2581.99 mm>2000 mmx_{\text{trial}} = \sqrt{6.66667 \times 10^6} = 2581.99\text{ mm} > 2000\text{ mm} Since 2581.99 mm>2000 mm2581.99\text{ mm} > 2000\text{ mm}, the point of zero slope lies in the longer right segment (2000 mm<x≤6000 mm2000\text{ mm} < x \le 6000\text{ mm}).
  2. Exact Solution in Right Segment (x>2000 mmx > 2000\text{ mm}, Macaulay bracket active): Setting dydx=0\frac{dy}{dx} = 0 in Eq. 1 for x>2000 mmx > 2000\text{ mm}: 20000x2−1.33333×1011−30000(x−2000)2=020000 x^2 - 1.33333 \times 10^{11} - 30000 (x - 2000)^2 = 0 20000x2−1.33333×1011−30000(x2−4000x+4×106)=020000 x^2 - 1.33333 \times 10^{11} - 30000 (x^2 - 4000 x + 4 \times 10^6) = 0 −10000x2+1.2×108x−2.53333×1011=0  ⟹  x2−12000x+25333333.3=0-10000 x^2 + 1.2 \times 10^8 x - 2.53333 \times 10^{11} = 0 \implies x^2 - 12000 x + 25333333.3 = 0 Solving the quadratic equation (selecting the root within 2000<x<6000 mm2000 < x < 6000\text{ mm}): xmax⁡=12000−144×106−101.3333×1062=12000−6531.972=2734.01 mm from support Ax_{\max} = \frac{12000 - \sqrt{144 \times 10^6 - 101.3333 \times 10^6}}{2} = \frac{12000 - 6531.97}{2} = \mathbf{2734.01\text{ mm}\text{ from support } A} (Standard closed-form verification measuring from the farther support BB, where b=4000 mm>a=2000 mmb = 4000\text{ mm} > a = 2000\text{ mm}: xmax⁡=L−L2−a23=6000−36−43×106=6000−3265.99=2734.01 mmx_{\max} = L - \sqrt{\frac{L^2 - a^2}{3}} = 6000 - \sqrt{\frac{36 - 4}{3} \times 10^6} = 6000 - 3265.99 = \mathbf{2734.01\text{ mm}}).
  3. Maximum Downward Deflection: Substituting x=2734.01 mmx = 2734.01\text{ mm} into Eq. 2 gives: ymax⁡=−11.476 mmy_{\max} = \mathbf{-11.476\text{ mm}}

Problem 2: Beam with Symmetrical Partial UDL (UPSC ESE Pattern)

Statement:
A simply supported beam of span L=8.0 mL = 8.0\text{ m} carries a uniformly distributed load w=24 kN/mw = 24\text{ kN/m} spanning over its central 4.0 m4.0\text{ m} length (from x=2.0 mx = 2.0\text{ m} to x=6.0 mx = 6.0\text{ m}). Flexural rigidity EI=4.0×1013 N⋅mm2EI = 4.0 \times 10^{13}\text{ N}\cdot\text{mm}^2.

  1. Apply the continuation trick to formulate the Macaulay bending moment equation.
  2. Solve for integration constant C1C_1.
  3. Compute the maximum deflection at midspan (x=4.0 mx = 4.0\text{ m}).

Solution:

Step 1: Support Reactions

By symmetry, the load of 24 kN/m×4.0 m=96 kN24\text{ kN/m} \times 4.0\text{ m} = 96\text{ kN} is shared equally:

RA=RB=962=48 kN=48000 NR_A = R_B = \frac{96}{2} = \mathbf{48\text{ kN} = 48000\text{ N}}

Step 2: Formulate Macaulay Equations with Continuation

Extend the downward UDL from x=6000 mmx = 6000\text{ mm} to 8000 mm8000\text{ mm}, and compensate with an upward UDL starting at x=6000 mmx = 6000\text{ mm}:

EId2ydx2=48000x  ∣  −24⟨x−2000⟩22  ∣  +24⟨x−6000⟩22EI \frac{d^2 y}{dx^2} = 48000 x \; \Big| \; - \frac{24 \langle x - 2000 \rangle^2}{2} \; \Big| \; + \frac{24 \langle x - 6000 \rangle^2}{2}

Integrating twice:

EIdydx=24000x2+C1  ∣  −4⟨x−2000⟩3  ∣  +4⟨x−6000⟩3EI \frac{dy}{dx} = 24000 x^2 + C_1 \; \Big| \; - 4 \langle x - 2000 \rangle^3 \; \Big| \; + 4 \langle x - 6000 \rangle^3 EIy=8000x3+C1x+C2  ∣  −⟨x−2000⟩4  ∣  +⟨x−6000⟩4EI y = 8000 x^3 + C_1 x + C_2 \; \Big| \; - \langle x - 2000 \rangle^4 \; \Big| \; + \langle x - 6000 \rangle^4

Step 3: Evaluate Constants

  • At x=0x = 0, y=0  ⟹  C2=0y = 0 \implies \mathbf{C_2 = 0}.
  • At x=8000 mmx = 8000\text{ mm}, y=0y = 0 (all brackets active): 0=8000(8000)3+C1(8000)−(8000−2000)4+(8000−6000)40 = 8000 (8000)^3 + C_1 (8000) - (8000 - 2000)^4 + (8000 - 6000)^4 8000×(5.12×1011)=4.096×10158000 \times (5.12 \times 10^{11}) = 4.096 \times 10^{15} −(6000)4=−1.296×1015-(6000)^4 = -1.296 \times 10^{15} +(2000)4=+1.60×1013=+0.016×1015+(2000)^4 = +1.60 \times 10^{13} = +0.016 \times 10^{15} Net=4.096×1015−1.296×1015+0.016×1015=2.816×1015\text{Net} = 4.096 \times 10^{15} - 1.296 \times 10^{15} + 0.016 \times 10^{15} = 2.816 \times 10^{15} 8000C1=−2.816×1015  ⟹  C1=−3.520×1011 N⋅mm28000 C_1 = -2.816 \times 10^{15} \implies \mathbf{C_1 = -3.520 \times 10^{11}\text{ N}\cdot\text{mm}^2}

Step 4: Midspan Deflection (x=4000 mmx = 4000\text{ mm})

At midspan x=4000 mmx = 4000\text{ mm}, the first bracket is active (4000−2000=20004000 - 2000 = 2000), while the second bracket is inactive (4000<60004000 < 6000):

EIy(4000)=8000(4000)3+(−3.520×1011)(4000)−(4000−2000)4EI y(4000) = 8000 (4000)^3 + (-3.520 \times 10^{11})(4000) - (4000 - 2000)^4 8000×(6.4×1010)=5.12×10148000 \times (6.4 \times 10^{10}) = 5.12 \times 10^{14} −3.520×1011×4000=−1.408×1015-3.520 \times 10^{11} \times 4000 = -1.408 \times 10^{15} −(2000)4=−1.60×1013=−0.016×1014-(2000)^4 = -1.60 \times 10^{13} = -0.016 \times 10^{14} EIy(4000)=5.12×1014−14.08×1014−0.16×1014=−9.12×1014 N⋅mm3EI y(4000) = 5.12 \times 10^{14} - 14.08 \times 10^{14} - 0.16 \times 10^{14} = -9.12 \times 10^{14}\text{ N}\cdot\text{mm}^3 ymid=−9.12×10144.0×1013=−22.800 mm(Downward)y_{\text{mid}} = \frac{-9.12 \times 10^{14}}{4.0 \times 10^{13}} = \mathbf{-22.800\text{ mm} \quad (\text{Downward})}

Problem 3: Beam with Concentrated Couple M0M_0 (State AE Pattern)

Statement:
A simply supported beam of span L=6.0 mL = 6.0\text{ m} carries a single clockwise concentrated couple M0=36 kN⋅mM_0 = 36\text{ kN}\cdot\text{m} (3.6×107 N⋅mm3.6 \times 10^7\text{ N}\cdot\text{mm}) at distance a=2.0 ma = 2.0\text{ m} from left support AA. Given EI=3.0×1013 N⋅mm2EI = 3.0 \times 10^{13}\text{ N}\cdot\text{mm}^2, determine:

  1. Support reactions RAR_A and RBR_B.
  2. The Macaulay slope and deflection equations.
  3. Slopes at both supports (θA\theta_A and θB\theta_B).
  4. The deflection under the applied couple.

Solution:

Step 1: Reactions

Clockwise couple M0M_0 requires an anti-clockwise reaction couple:

ΣMA=0  ⟹  M0−RB⋅L=0  ⟹  RB=M0L=366.0=+6.0 kN=+6000 N (Upward)\Sigma M_A = 0 \implies M_0 - R_B \cdot L = 0 \implies R_B = \frac{M_0}{L} = \frac{36}{6.0} = \mathbf{+6.0\text{ kN} = +6000\text{ N (Upward)}} ΣFy=0  ⟹  RA=−RB=−6.0 kN=−6000 N (Downward!)\Sigma F_y = 0 \implies R_A = - R_B = \mathbf{-6.0\text{ kN} = -6000\text{ N (Downward!)}}

Step 2: Formulate Macaulay Equations

Using ⟨x−a⟩0\langle x - a \rangle^0 for the couple:

EId2ydx2=RAx  ∣  +M0⟨x−2000⟩0EI \frac{d^2 y}{dx^2} = R_A x \; \Big| \; + M_0 \langle x - 2000 \rangle^0 EId2ydx2=−6000x  ∣  +3.6×107⟨x−2000⟩0EI \frac{d^2 y}{dx^2} = -6000 x \; \Big| \; + 3.6 \times 10^7 \langle x - 2000 \rangle^0

Integrating once for slope:

EIdydx=−3000x2+C1  ∣  +3.6×107⟨x−2000⟩1EI \frac{dy}{dx} = -3000 x^2 + C_1 \; \Big| \; + 3.6 \times 10^7 \langle x - 2000 \rangle^1

Integrating twice for deflection:

EIy=−1000x3+C1x+C2  ∣  +1.8×107⟨x−2000⟩2EI y = -1000 x^3 + C_1 x + C_2 \; \Big| \; + 1.8 \times 10^7 \langle x - 2000 \rangle^2

Step 3: Evaluate Constants

  • At x=0x = 0, y=0  ⟹  C2=0y = 0 \implies \mathbf{C_2 = 0}.
  • At x=6000 mmx = 6000\text{ mm}, y=0y = 0: 0=−1000(6000)3+C1(6000)+1.8×107(6000−2000)20 = -1000 (6000)^3 + C_1 (6000) + 1.8 \times 10^7 (6000 - 2000)^2 −1000×2.16×1011=−2.16×1014-1000 \times 2.16 \times 10^{11} = -2.16 \times 10^{14} 1.8×107×(1.6×107)=+2.88×10141.8 \times 10^7 \times (1.6 \times 10^7) = +2.88 \times 10^{14} 0=+0.72×1014+6000C1  ⟹  6000C1=−7.2×10130 = +0.72 \times 10^{14} + 6000 C_1 \implies 6000 C_1 = -7.2 \times 10^{13} C1=−1.200×1010 N⋅mm2\mathbf{C_1 = -1.200 \times 10^{10}\text{ N}\cdot\text{mm}^2}

Step 4: Slopes and Deflection

  • Slope at Support AA (x=0x = 0): θA=C1EI=−1.200×10103.0×1013=−0.000400 rad=−0.0229∘\theta_A = \frac{C_1}{EI} = \frac{-1.200 \times 10^{10}}{3.0 \times 10^{13}} = \mathbf{-0.000400\text{ rad} = -0.0229^\circ}
  • Slope at Support BB (x=6000 mmx = 6000\text{ mm}): EIθB=−3000(6000)2−1.20×1010+3.6×107(4000)EI \theta_B = -3000 (6000)^2 - 1.20 \times 10^{10} + 3.6 \times 10^7 (4000) EIθB=−1.08×1011−0.12×1011+1.44×1011=+0.24×1011EI \theta_B = -1.08 \times 10^{11} - 0.12 \times 10^{11} + 1.44 \times 10^{11} = +0.24 \times 10^{11} θB=2.40×10103.0×1013=+0.000800 rad=+0.0458∘\theta_B = \frac{2.40 \times 10^{10}}{3.0 \times 10^{13}} = \mathbf{+0.000800\text{ rad} = +0.0458^\circ}
  • Deflection at Couple Location (x=2000 mmx = 2000\text{ mm}): EIy(2000)=−1000(2000)3+(−1.20×1010)(2000)+0EI y(2000) = -1000 (2000)^3 + (-1.20 \times 10^{10})(2000) + 0 EIy(2000)=−8.0×109−2.4×1010=−3.20×1010 N⋅mm3EI y(2000) = -8.0 \times 10^9 - 2.4 \times 10^{10} = -3.20 \times 10^{10}\text{ N}\cdot\text{mm}^3 ycouple=−3.20×10103.0×1013=−1.067 mm(Downward)y_{\text{couple}} = \frac{-3.20 \times 10^{10}}{3.0 \times 10^{13}} = \mathbf{-1.067\text{ mm} \quad (\text{Downward})}

9. Comparative Analysis & Summary Matrix

Method Number of Unknown Constants Handling of Interior Point Loads Handling of Partial UDLs Best Exam Suitability
Direct Double Integration 2n2n (n=number of segmentsn = \text{number of segments}) Must set up nn separate ODEs with interface matching Extremely cumbersome algebra Single continuous load across whole span
Macaulay's Method Always Exactly 2 (C1,C2C_1, C_2) Single equation with ⟨x−a⟩1\langle x - a \rangle^1 brackets Simple continuation with compensating upward UDL Multiple point loads, couples, and partial UDLs
Moment-Area Method (Mohr) 0 (Geometric integration) Requires drawing M/EIM/EI diagrams and calculating areas/centroids Moderate complexity for multi-segment centroids Non-prismatic beams, cantilevers, symmetric spans
Conjugate Beam Method 0 (Fictitious beam analysis) Deflection equals bending moment of fictitious beam Requires solving fictitious beam shear and moments Non-uniform EIEI and fixed/continuous supports

10. Key Takeaways & Exam-Oriented Highlights

  1. Section X-X Placement Rule: Always place the cutting section in the very last (rightmost) bay so that every load on the span appears in the master equation.
  2. Integral Power Rule:
    • Point load: ∫⟨x−a⟩1 dx=⟨x−a⟩22  ⟹  ∬=⟨x−a⟩36\int \langle x - a \rangle^1 \, dx = \frac{\langle x - a \rangle^2}{2} \implies \iint = \frac{\langle x - a \rangle^3}{6}.
    • UDL: ∫⟨x−a⟩2 dx=⟨x−a⟩33  ⟹  ∬=⟨x−a⟩412\int \langle x - a \rangle^2 \, dx = \frac{\langle x - a \rangle^3}{3} \implies \iint = \frac{\langle x - a \rangle^4}{12}.
    • Couple: ∫⟨x−a⟩0 dx=⟨x−a⟩1  ⟹  ∬=⟨x−a⟩22\int \langle x - a \rangle^0 \, dx = \langle x - a \rangle^1 \implies \iint = \frac{\langle x - a \rangle^2}{2}.
  3. Partial UDL Rule: If a UDL does not go to the right end, extend it and add a compensating upward load.
  4. Max Deflection Location for Eccentric Point Load: The maximum deflection never occurs under the load itself (unless centered). It always shifts toward the center inside the longer segment at: xmax⁡=L2−b23(measured from support nearest the load)x_{\max} = \sqrt{\frac{L^2 - b^2}{3}} \quad (\text{measured from support nearest the load}) δmax⁡=Wb(L2−b2)3/293 EI L\delta_{\max} = \frac{W b (L^2 - b^2)^{3/2}}{9 \sqrt{3} \, EI \, L}

11. Common Traps, Pitfalls & Counter-Intuitive Exam Scenarios

  • Trap 1: Expanding Macaulay Brackets:
    Misconception: Writing ⟨x−2⟩2=x2−4x+4\langle x - 2 \rangle^2 = x^2 - 4x + 4.
    Correction: Never expand! Integrating expanded polynomials violates the singularity condition when x<2x < 2.
  • Trap 2: Using Exponent 1 for Pure Couples:
    Misconception: Writing M0⟨x−a⟩1M_0 \langle x - a \rangle^1.
    Correction: This has units of N⋅mm2\text{N}\cdot\text{mm}^2, which corrupts dimensions and prevents the slope jump. The exponent must be 00 (M0⟨x−a⟩0M_0 \langle x - a \rangle^0).
  • Trap 3: Forgetting Upward Compensating UDL:
    Misconception: Entering only −w⟨x−a⟩22-\frac{w \langle x - a \rangle^2}{2} when UDL terminates at x=bx = b.
    Correction: This erroneously continues the UDL across the whole beam. You must add +w⟨x−b⟩22+\frac{w \langle x - b \rangle^2}{2}.
  • Trap 4: Discarding Positive Bracket Values:
    Misconception: Forgetting that when x≥ax \ge a, the bracket is strictly active and evaluated as (x−a)(x - a).

12. Standard Code Provisions & Objective Practice Problems

Reference Code Clauses

  • IS 456:2000 Cl. 23.2 & IS 800:2007 Table 6:
    Structural safety standards mandate that calculated elastic deflections using Macaulay's method must be compared against span-to-depth ratios and absolute deflection limits (Span/250\text{Span}/250 for total load, Span/300\text{Span}/300 for live load on steel beams).

Objective Practice Problems

Problem 1 (GATE CE)

In Macaulay's method, the bending moment due to a concentrated couple MM acting clockwise at distance aa from the origin is written as:

  • (A) M⟨x−a⟩1M \langle x - a \rangle^1
  • (B) M⟨x−a⟩0M \langle x - a \rangle^0
  • (C) M2⟨x−a⟩2\frac{M}{2} \langle x - a \rangle^2
  • (D) M(x−a)M(x - a)

Answer: (B)
Solution:
A concentrated couple has units of moment and must be entered as M⟨x−a⟩0M \langle x - a \rangle^0 so that upon integration it yields slope step M⟨x−a⟩1M \langle x - a \rangle^1 and continuous deflection M2⟨x−a⟩2\frac{M}{2} \langle x - a \rangle^2.


Problem 2 (UPSC ESE)

A simply supported beam of span LL carries a concentrated load WW at distance aa from the left support (a<L/2a < L/2). The maximum deflection of the beam occurs:

  • (A) Exactly at midspan (x=L/2x = L/2)
  • (B) Directly under the concentrated load (x=ax = a)
  • (C) Between the load and the midspan
  • (D) Outside the span

Answer: (C)
Solution:
For an eccentric load, the point of zero slope (and hence maximum deflection) always lies between the concentrated load and the midspan inside the longer segment at x=(L2−b2)/3x = \sqrt{(L^2 - b^2)/3} from the closer support.


Problem 3 (SSC JE / RRB JE)

When applying Macaulay's method to a beam carrying a partial UDL that does not extend to the right support, the procedure required is:

  • (A) Ignore the load after the cutoff point
  • (B) Extend the load to the right support and add an equal upward UDL from the cutoff point
  • (C) Integrate backwards from the right support
  • (D) Use direct double integration instead

Answer: (B)
Solution:
Macaulay brackets do not switch off automatically; the load must be extended to the right end and balanced by a fictitious upward compensating UDL from the cutoff point to the right end.


Problem 4 (GATE CE)

A simply supported beam of span L=6 mL = 6\text{ m} carries an eccentric load W=30 kNW = 30\text{ kN} at a=2 ma = 2\text{ m} from left support AA (b=4 mb = 4\text{ m}). The distance of the point of maximum deflection from support AA is:

  • (A) 2.00 m2.00\text{ m}
  • (B) 2.58 m2.58\text{ m}
  • (C) 2.73 m2.73\text{ m}
  • (D) 3.00 m3.00\text{ m}

Answer: (C)
Solution:
The longer segment is on the right (b=4 mb = 4\text{ m}). Measuring from support BB, the maximum deflection is at distance xB=(L2−a2)/3=(36−4)/3=10.67=3.266 mx_B = \sqrt{(L^2 - a^2)/3} = \sqrt{(36 - 4)/3} = \sqrt{10.67} = 3.266\text{ m}.
Therefore, the distance from support AA is xA=6.000−3.266=2.734 m≈2.73 mx_A = 6.000 - 3.266 = \mathbf{2.734\text{ m} \approx 2.73\text{ m}}.


Problem 5 (State AE / ESE)

In Macaulay's method, what is the value of the integration constant C2C_2 for a simply supported beam with origin at the left pinned support?

  • (A) WL2/16W L^2 / 16
  • (B) wL3/24w L^3 / 24
  • (C) 00
  • (D) Depends on the magnitude of the loads

Answer: (C)
Solution:
At x=0x = 0, y=0y = 0. Since all loads lie at x>0x > 0, all Macaulay brackets are negative and evaluate to zero, leaving 0=0+0+C2  ⟹  C2=00 = 0 + 0 + C_2 \implies C_2 = 0.