Collapse Load Theorems, Mechanism Method & Virtual Work (IS 800:2007 Section 8)
In this chapter (4 topics)
On this page
- 1. Executive Summary & Code Hierarchy
- 2. The Three Fundamental Conditions of Plastic Collapse
- 2.1 The Equilibrium Condition
- 2.2 The Mechanism Condition
- 2.3 The Yield Condition
- 3. Limit Theorems of Plastic Analysis
- 3.1 The Lower Bound (Static / Safe) Theorem
- 3.2 The Upper Bound (Kinematic / Unsafe) Theorem
- 3.3 The Uniqueness Theorem
- 4. Mechanism Classifications & Independent Mechanisms
- 4.1 Number of Independent Mechanisms (m)
- 4.2 Classification of Elementary Mechanisms
- 5. The Principle of Virtual Work in Plastic Analysis
- 5.1 Internal Plastic Work (Wint)
- 5.2 External Work Done by Loads (Wext)
- 5.3 Work Equilibrium Equation
- 6. Standard Canonical Collapse Loads
- 7. Two-Span Continuous Beams & Variable Cross-Section Mechanics
- 8. SVG Engineering Visualizations
- FIGURE STEEL-06-02A: Limit Theorems Spectrum & Mechanism Types
- FIGURE STEEL-06-02B: Virtual Work Mechanism Method Canonical Beams
- 9. Complete Step-by-Step Mathematical Derivations
- Derivation 1: Exact Collapse Load of Propped Cantilever under UDL
- Derivation 2: Fixed Beam with Unsymmetrical Point Load
- 10. Multi-Exam Comprehensive Solved Examples
- Example 1: Propped Cantilever under UDL (GATE CE / ESE Conventional)
- Example 2: Fixed-Ended Beam with Unsymmetrical Point Load
- Example 3: Two-Span Continuous Beam with Variable Mp
- 11. Exam Traps, Common Pitfalls & Sign Conventions
- Trap 1: Confusing Propped Cantilever Hinge Location Distance
- Trap 2: Work Signs in Virtual Work Equations
- Trap 3: Independent Mechanisms Formula Inversion
- Trap 4: Continuous Support Plastic Moment Selection
- 12. Official Exam Practice Questions
- Question 1 (GATE CE)
- Question 2 (UPSC ESE)
- Question 3 (SSC JE)
- Question 4 (State AE / RRB JE)
- Question 5 (UPSC ESE Conventional)
1. Executive Summary & Code Hierarchy
In elastic structural analysis, solving an indeterminate framework requires satisfying three classical conditions: Equilibrium, Compatibility of deformations, and Linear stress-strain relationships. Because the material remains elastic, analysis is mathematically constrained to linear superposition and simultaneous differential equations.
In Plastic Analysis (Limit State of Collapse), structural steel's ductile plastic plateau fundamentally transforms structural behavior. When a statically indeterminate structure is subjected to proportional loading:
- Highly stressed sections reach their fully plastic moment capacity and form plastic hinges.
- As loading continues, plastic hinges rotate plastically at constant moment , forcing additional load to be redistributed to less stressed elastic regions of the structure (moment redistribution).
- Plastic hinges continue to form sequentially until the structure possesses enough degrees of freedom to transform into an unstable kinematic mechanism, precipitating plastic collapse.
Plastic collapse analysis is governed by IS 800:2007 (Section 8), Eurocode 3 (EN 1993-1-1 Cl. 5.6), and AISC 360-16 (Appendix 1). The methods are underpinned by three elegant mathematical theorems formulated by Prager, Drucker, and Greenberg: the Upper Bound (Kinematic) Theorem, the Lower Bound (Static) Theorem, and the Uniqueness Theorem. By applying the Principle of Virtual Work, structural engineers can bypass tedious differential equations and compute the true collapse load of complex continuous beams, portal frames, and multi-story structures directly through elementary arithmetic.
┌───────────────────────────────────────────────────────────────────────────────────┐
│ THE THREE LIMIT THEOREMS OF PLASTICITY │
├───────────────────────────────────────────────────────────────────────────────────┤
│ 1. Lower Bound (Static / Safe) Theorem: │
│ W_stat ≤ W_c (Satisfies Equilibrium + Yield Condition |M| ≤ Mp) │
│ │
│ 2. Upper Bound (Kinematic / Unsafe) Theorem: │
│ W_kin ≥ W_c (Satisfies Equilibrium + Mechanism Condition W_ext = W_int) │
│ │
│ 3. Uniqueness Theorem: │
│ W_stat = W_c = W_kin (Simultaneously satisfies Equilibrium, Mechanism & Yield) │
└───────────────────────────────────────────────────────────────────────────────────┘
2. The Three Fundamental Conditions of Plastic Collapse
For any structure reaching its plastic collapse load , three fundamental physical conditions must be satisfied:
2.1 The Equilibrium Condition
The internal bending moments , shear forces , and axial forces must satisfy the static equations of equilibrium () with the applied external collapse loads across every member and joint in the structure.
2.2 The Mechanism Condition
A sufficient number of plastic hinges must form to transform the structure (or an isolated portion of it) into an unstable kinematic mechanism with at least one degree of freedom.
- For a structure with degree of static indeterminacy , the number of plastic hinges required for complete collapse is:
- If an isolated span or cantilever collapses while other spans remain rigid, it forms a partial collapse mechanism with .
- If multiple collapse modes form simultaneously at the same load, it forms an over-complete collapse mechanism ().
2.3 The Yield Condition
At no point throughout the entire structure may the internal bending moment exceed the fully plastic moment capacity of the cross-section:
3. Limit Theorems of Plastic Analysis
3.1 The Lower Bound (Static / Safe) Theorem
Statement: If an internal bending moment distribution can be found which is in static equilibrium with the applied external loads and nowhere exceeds the plastic moment capacity (), then the load is less than or equal to the true collapse load :
- Physical Meaning: A structure cannot collapse under a load that can be carried by a statically admissible, non-yielding stress field.
- Engineering Application: The Lower Bound theorem is intrinsically safe for design. If an engineer guesses any reasonable equilibrium moment diagram satisfying , the resulting design load is guaranteed not to cause collapse.
- To find the true collapse load via the static method:
3.2 The Upper Bound (Kinematic / Unsafe) Theorem
Statement: If a valid kinematic mechanism is assumed and the corresponding load is computed by equating the external virtual work to the internal plastic dissipation work (), then this load is greater than or equal to the true collapse load :
- Physical Meaning: The structure will always seek the path of least resistance. If you guess an incorrect collapse mechanism, the structure requires more energy to collapse in that mode than in its true mode.
- Engineering Application: The Upper Bound theorem is potentially unsafe if all possible mechanisms are not investigated.
- To find the true collapse load via the mechanism method:
3.3 The Uniqueness Theorem
Statement: If a load corresponds to a stress distribution that simultaneously satisfies:
- Equilibrium Condition
- Mechanism Condition
- Yield Condition ()
then this load is the unique, true plastic collapse load .
4. Mechanism Classifications & Independent Mechanisms
In complex frames, many possible plastic hinges can form. To systematically explore all collapse modes without missing the critical one, Neal and Symonds established the Method of Independent Mechanisms.
4.1 Number of Independent Mechanisms ()
Let:
- = Total number of possible plastic hinge locations (critical sections: fixed supports, joints between members of different inclination or cross-section, and under concentrated point loads).
- = Degree of static indeterminacy of the structure.
The number of independent elementary mechanisms is given by:
Any complex collapse mechanism can be expressed as a linear algebraic combination of these independent mechanisms.
4.2 Classification of Elementary Mechanisms
- Beam Mechanisms: Plastic hinges form within a single flexural member (at supports and under point loads). Number of beam mechanisms = number of loaded spans.
- Panel / Sway Mechanisms: Plastic hinges form at the tops and bottoms of columns, allowing lateral side-sway under horizontal loads. Number of sway mechanisms = number of building storeys.
- Gable Mechanisms: Plastic hinges form at the eaves and ridge of a pitched roof portal frame.
- Joint Mechanisms: Plastic hinges form around a node connecting three or more members to allow rotation of the joint.
- Combined Mechanisms: Formed by superimposing beam and sway mechanisms to eliminate hinges at common joints where work cancelled out, often yielding the lowest collapse load .
5. The Principle of Virtual Work in Plastic Analysis
The mechanism method utilizes the Principle of Virtual Displacements (Virtual Work) applied to the rigid-body collapse kinematics.
5.1 Internal Plastic Work ()
When a plastic hinge undergoes a relative plastic rotation angle , the internal work dissipated by the constant plastic moment is always strictly positive:
Important Note: Plastic dissipation is irreversible; energy is dissipated regardless of whether the hinge opens in sagging or hogging. Thus, absolute values of rotation must always be summed.
5.2 External Work Done by Loads ()
For a set of concentrated loads undergoing virtual vertical displacements , and distributed loads undergoing displacement fields :
5.3 Work Equilibrium Equation
By the principle of virtual work for a mechanism with 1 degree of freedom:
Solving for the load parameter yields the kinematic collapse load .
6. Standard Canonical Collapse Loads
7. Two-Span Continuous Beams & Variable Cross-Section Mechanics
Consider a continuous beam spanning over multiple supports with variable plastic moment capacities (e.g., span with capacity and span with capacity ).
Span AB (L1, Mp1) Span BC (L2, Mp2)
W1 w2
▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼
▲───────────────────▲─────────────────────────────────▲
A B C
(Simple) (Continuous) (Simple)
- Hinge at Continuous Support:
- Over intermediate support , the plastic moment capacity is governed by the weaker of the two adjoining members:
- Independent Span Failure Modes:
- Because supports prevent vertical deflection, failure of span can occur independently of span as a partial collapse mechanism.
- Mechanism 1 (Failure of Span AB): Plastic hinges form at midspan of () and at support (). Support is simple (no hinge).
- Mechanism 2 (Failure of Span BC): Propped cantilever mechanism in span under UDL , with hinges at support () and within span ().
- Critical Collapse Load: The structure collapses under whichever span reaches its collapse load first.
8. SVG Engineering Visualizations
FIGURE STEEL-06-02A: Limit Theorems Spectrum & Mechanism Types
The following technical diagram details the Upper Bound, Lower Bound, and Uniqueness theorems alongside the visual classifications of Beam, Sway, and Combined collapse mechanisms.
FIGURE STEEL-06-02B: Virtual Work Mechanism Method Canonical Beams
The following engineering schematic details the kinematics, rotation angles, virtual work equations, and collapse loads for a Propped Cantilever under UDL and a Fixed-Fixed Beam under unsymmetrical point load.
9. Complete Step-by-Step Mathematical Derivations
Derivation 1: Exact Collapse Load of Propped Cantilever under UDL
Consider a propped cantilever of span with fixed support at () and simple roller prop at (), subjected to a uniformly distributed load .
Step 1: Kinematic Mechanism Setup
- Static indeterminacy . Number of hinges required for collapse .
- One hinge must form at the fixed support (capacity ).
- One interior hinge forms at an unknown distance from the simple prop (capacity ).
- Let the beam segment to rotate by virtual angle .
- The downward deflection at the interior plastic hinge is:
- The beam segment to rotates by virtual angle . By geometric displacement continuity at the hinge:
- Relative rotation angle at the interior hinge:
- Relative rotation angle at fixed support :
Step 2: Virtual Work Equating
- Internal plastic work dissipated at the two hinges:
- External work done by UDL (area of displacement triangle ):
- Equating :
Step 3: Minimization via Upper Bound Theorem By the Upper Bound theorem, the true collapse load is the minimum of all kinematic loads with respect to the hinge location :
Using the quotient rule:
Solving this quadratic equation for physical positive :
Step 4: Evaluating the Collapse Load Substitute into the load equation:
Substituting back into :
Derivation 2: Fixed Beam with Unsymmetrical Point Load
Consider a fixed beam of span carrying a concentrated load at distance from left support and distance from right support ().
- Static indeterminacy . Three hinges form: at , under load , and at .
- Let vertical deflection under load be .
- Rotation at : .
- Rotation at : .
- Rotation at : .
- Internal plastic work:
- External work:
- Equating :
10. Multi-Exam Comprehensive Solved Examples
Example 1: Propped Cantilever under UDL (GATE CE / ESE Conventional)
Problem Statement: A propped cantilever of span is fabricated from an ISMB section having a fully plastic moment capacity .
- Determine the exact plastic collapse UDL and the total collapse load .
- Find the exact position of the interior plastic hinge from the roller support and from the fixed support.
- Verify the result using the Static (Lower Bound) Method.
Solution:
Step 1: Collapse Load Computation
- From Derivation 1:
- Total collapse load on the span:
Step 2: Plastic Hinge Locations
- Distance from simple roller prop :
- Distance from fixed support :
Step 3: Static (Lower Bound) Verification
- At the roller support , reaction : The interior plastic hinge occurs at the section of maximum sagging bending moment, where shear force is zero ():
- Maximum sagging moment at :
- Hogging moment at fixed support ():
- The internal bending moment satisfies equilibrium, mechanism, and everywhere. The solution is exact and uniquely verified!
Example 2: Fixed-Ended Beam with Unsymmetrical Point Load
Problem Statement: A fixed-ended beam of span has a plastic moment capacity . A concentrated load is applied at distance from the left support ().
- Calculate the plastic collapse load .
- Compare this with the collapse load if the load were applied symmetrically at midspan.
Solution:
Step 1: Unsymmetrical Collapse Load
- From Derivation 2:
Step 2: Symmetrical Midspan Load Comparison
- If the load is at midspan ():
- Conclusion: Moving the point load closer to the support increases the collapse load from to ().
Example 3: Two-Span Continuous Beam with Variable
Problem Statement: A two-span continuous beam has spans and .
- Span has plastic moment capacity and carries a concentrated load at midspan.
- Span has plastic moment capacity and carries a uniformly distributed load .
- Determine the collapse load for each span independently.
Solution:
Step 1: Intermediate Support Capacity
- At continuous support , the hinge forms at the smaller plastic moment capacity:
Step 2: Mechanism in Span AB (Point Load )
- Hinges form at midspan of () and over support ().
- Kinematics: , midspan hinge , support hinge .
- Internal work:
- External work:
- Equating:
Step 3: Mechanism in Span BC (UDL )
- Span acts as a propped cantilever: hinge at support () and interior hinge in span ().
- Let the interior hinge form at distance from roller .
- Virtual work equation:
- Optimizing for minimum ():
11. Exam Traps, Common Pitfalls & Sign Conventions
Trap 1: Confusing Propped Cantilever Hinge Location Distance
- The Trap: Forgetting whether is measured from the fixed end or the simple support.
- The Rule:
- From the simple (propped) support: .
- From the fixed support: .
- Memory Aid: Maximum sagging moment always forms closer to the simple prop where shear is smaller!
Trap 2: Work Signs in Virtual Work Equations
- Common Mistake: Treating hogging hinges as negative work and subtracting them from sagging hinges.
- The Reality: Plastic hinges dissipate energy through mechanical friction. INTERNAL PLASTIC WORK IS ALWAYS STRICTLY POSITIVE: Never subtract plastic hinge work!
Trap 3: Independent Mechanisms Formula Inversion
- Number of independent mechanisms is .
- It is NOT or .
- Hinges required for complete collapse is .
Trap 4: Continuous Support Plastic Moment Selection
- In a continuous beam with unequal members meeting at a support (), the hinge over the support always forms at the weaker section capacity .
12. Official Exam Practice Questions
Question 1 (GATE CE)
A propped cantilever beam of span is subjected to a uniformly distributed load over its entire length. If the plastic moment capacity of the section is , the plastic collapse load is:
- (A)
- (B)
- (C)
- (D)
Detailed Solution:
- For a propped cantilever with UDL, .
- Correct Answer: (B)
Question 2 (UPSC ESE)
According to the Lower Bound (Static) Theorem of plastic analysis, a load computed from a statically admissible bending moment field satisfying :
- (A) Is always greater than the true collapse load.
- (B) Is always less than or equal to the true collapse load.
- (C) Is unrelated to the true collapse load.
- (D) Represents an upper bound on structural capacity.
Detailed Solution:
- The Lower Bound Theorem states that any equilibrium stress distribution that nowhere violates the yield condition yields a safe load: .
- Correct Answer: (B)
Question 3 (SSC JE)
The number of plastic hinges required to transform a fixed-fixed beam of degree of static indeterminacy into a complete plastic collapse mechanism is:
- (A) 2
- (B) 3
- (C) 4
- (D) 5
Detailed Solution:
- Number of hinges for complete collapse: .
- Correct Answer: (B)
Question 4 (State AE / RRB JE)
A fixed-fixed beam of span carries a concentrated load at distance from the left support. The plastic collapse load in terms of is:
- (A)
- (B)
- (C)
- (D)
Detailed Solution:
- .
- .
- Correct Answer: (B)
Question 5 (UPSC ESE Conventional)
State and prove the Upper Bound (Kinematic) Theorem of plastic analysis. Using the principle of virtual work, derive the collapse load of a propped cantilever of span carrying a central concentrated load .
Detailed Solution:
- Upper Bound Theorem Statement: The load factor computed from any kinematically admissible collapse mechanism is an upper bound to the true collapse load: .
- Proof: Let and be the true collapse moment and load, satisfying equilibrium and . Let and be the displacements and rotations of an assumed mechanism. By virtual work: . Since .
- Derivation for Propped Cantilever with Central Point Load :
- Indeterminacy hinges required (at fixed support and under load ).
- Midspan deflection .
- Hinge rotation at midspan . Hinge rotation at fixed support .
- Internal work: .
- External work: .
- Equating .